Cabinet Hardware

How to select your hardware

Step 1 - Measure current hardware.  Pulls are measured from hole to hole.  Typical pull sizes are 3", 3 3/4" or 4".

Step 2 - Choose Finish.  Pulls and knobs come in a variety of finishes. Most, but not all, of our stock hardware come in the following finishes.  We will work with you to find hardware if you cannot find what you like within our stock selection.

Step 3 - Decide your style.  We have the following stock styles to choose from but would be happy to help you find something not listed.  Here are some things to consider:

      * If you do not have any hardware, you can chose any style or size available.

      * If you currently have hardware, it is best to measure and select a comparable style to fit into the current              holes.  

      * If you would like to change the size of your current hardware, i.e. go from knobs to pulls, there will be              an additional charge. Charges vary depending on if we are just drilling new holes or filling old holes                and drilling new ones.